Devising ways to remove construction dust on your site is crucial. Considering the adverse effects dust will have on your employees, equipment, and the work site at large, dust control is inevitable. In doing so, you’re sure of improving the general working environment as well as increasing employee productivity. Below are the most effective methods to remove construction dust.

Spray water on the area to contain the dust

The use of water to manage construction dust is one of the cheapest and easiest methods of dust containment. Spraying down the area with water works best in suppressing dust in your worksite provided you check the weather conditions first. The rule of thumb for this is to water the site at least 3 times a day. On top of this, you should ensure that you don’t overwater as that might lead to runoff and erosion. To do this best, consider searching for water trucks from reliable sites like bosstek.com to spray water over dust-prone areas on your worksite.

Consider the use of mulch and vegetation

In most cases, bare pieces of land experience higher dust levels since the soil particles are loose. Therefore, you need to come up with ways to cover these areas to make them dust-free. As such, applying mulch and vegetation is an 80% effective way to remove construction dust from your work site. By covering up bare soils with mulch, you reduce soil particles’ exposure to wind. As a result, you keep dust particles at a minimum.

Barricade the area

The use of barriers such as setting up a fence work effectively in putting construction dust at a minimum. When you barricade the area, you’re separating the area where construction works such as cutting and mixing of materials happen from the rest of the area. As a result, dust is only going to accumulate in a particular area rather than the entire working site.

Apply the use of chloride

Chloride is an effective dust suppression product that you should consider using for your work site. Its hygroscopic nature allows it to suck and retain moisture from the surroundings and transfer it to your site. Consequently, chloride manages to keep your site damp, thus reducing dust levels even in dry and hot conditions. Businesses also use chloride to stabilize unpaved roads and give them a long-lasting impact.

Set speed limits for vehicles

Fast-moving vehicles on unpaved roads are some of the top causes of construction dust. To minimize this, you can ensure the vehicles move at reduced speeds at the worksite. You could preferably set the speed limits to 45 to 30 mph. Consequently, dust emission will be reduced by a significant rate of 25%.

Construction dust is a nuisance to both your workers and the equipment in your work site. You’d never like to keep incurring costs due to excessive dust levels at your construction site. Therefore, you need to implement the most effective ways to reduce it. Above are some of the tips you should apply to ensure construction dust doesn’t affect your productivity on-site.